• Point-of-Use water filter at the Point-of-Care

    Safe water hygiene with the i3 ONE tap water filter

    The i3 ONE Point-of-Use (POU) water filter is used in medical settings to prevent infections caused by bacteria such as Legionella pneumophila, Pseudomonas aeruginosa and non-tuberculous mycobacteria (NTM). It is used on the water tap for the microfiltration of piped water.

    • Assists prevent infections caused by waterborne pathogens from water pipes

    • Effective protection in areas where aerosols are generated

    • Specifically developed to protect immunocompromised and immunosuppressed patients

    • Especially relevant in oncology, neonatology, transplant and intensive care units
    i3 ONE i3 ONE | U.S.
    Sterilfilter water tap i3 one

    i3 ONE

    Sterilfilter i3 One
    Request Information

    This Point-of-Use water filter is a CE-marked Class I medical device and fulfils all the requirements of the EU Medical Device Regulation (MDR).

    The quick-release coupling allows the filter to be changed quickly and safely at the tap.

    Information on the corresponding quick-release couplings and adapters can be found in the Accessories Catalogue under the Accessories tab.

    • Bacterial retention as per ASTM F838

    • Effective protection from retrograde contamination

    • Protection due to the bacteriostatic properties of the filter housing in accordance with ISO 22196

    • Compact design with a surface that can be disinfected by wiping for unlimited safe use

    • Reliable water filtration with a nominal pore size of 0.2 µm (microfiltration)

    • Proven biocompatibility for user protection and patient safety

    • Angled laminar water jet to protect against contamination from the siphon

    • High, stable flow rate throughout the duration of use
    Flow rate 12 L/min at 5 bar (initial)
    Bacterial retention > 7 log per cm2 (Brev. Dim.) per cm2 filter area
    Authorized for use with drinking water Plastics suitable for use with drinking water as per BS 6920
    Protection from retrograde contamination > 4 log Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus within 24 hours
    Disinfection Can be disinfected by wiping with normal surface disinfectant
    Operating pressure max 5 bar
    Operating temperature 60 °C (max 70 °C for 30 mins)
    Duration of use 50 days (7 weeks)
    Membrane i3 high performance flat membrane
    Pore size of membrane 0.2 µm
    Material authorization Product is biocompatible as per ISO 10993-1
    Shelf life 5 years
    Chlorine resistance ≤ 200 ppm active chlorine for 1 hour; ≤ 10 ppm active chlorine for 50 days
    Attachment Quick-release coupling is required for installation.
    Labelling Serial number / DataMatrix Code for documentation of filter changes

    i3 ONE | U.S.

    Request Information

    This i3 ONE Point-of-Use water filter is a FDA cleared medical device class II.

    With its dual membrane layers, the i3 ONE is validated for the retention of bacteria in accordance with ASTM F838 standard for sterilizing grade membrane filters. The membrane retains bacteria, protozoa, fungi and particles larger than 0.2 µm.

    The intended use of the water filter i3 ONE is to filter EPA quality drinking water. It retains bacteria, which may aid in infection control. The filters produce water that is appropriate for washing and drinking, superficial wound cleansing (minor cuts, scrapes and abrasions), cleaning of equipment used in medical procedures and washing of surgeon’s hands. The water filters are not intended to provide water that can be used as a substitute for USP grade sterile water.

    A quick-release coupling allows the filter to be changed quickly and safely at the tap.

    Information on the corresponding quick-release couplings can be found soon in the Couplings Catalog under the Couplings tab.

    • Sterilizing grade membrane with a double layer pore size of 0.6 µm and 0.2 µm (microfiltration)

    • Protection due to the bacteriostatic properties of the filter housing in accordance with ISO 22196

    • Patented design provides a laminar flow directed away from the sinks drain hole

    • High, stable flow rate throughout the duration of use

    • Quick connection for quick interchanging of the filter

    • Compact design for more hand washing space
    Flow rate 3.2 gal/min (12 L/min) at 75 psi (5 bar) initial
    Bacterial retention > 7 log per cm2 (Brev. Dim.) per cm2 filter area
    Authorized for use with drinking water Plastics suitable for use with drinking water as per BS 6920
    Extraneous contamination > 4 log Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus within 24 hours
    Disinfection Can be disinfected by wiping with normal surface disinfectant
    Operating pressure max 75 psi (5 bar)
    Operating temperature max 140 °F (60 °C) during normal use
    max 158 °F (70 °C) for 30 mins
    Duration of use 50 days
    Membrane i3 High performance pleated membrane
    Pore size of membrane 0.2 µm
    Shelf life 5 years
    Chlorine resistance ≤ 200 ppm active chlorine for 1 hour; ≤ 10 ppm active chlorine for 50 days
    Attachment Quick-release coupling is required for installation
    Labelling Serial number / DataMatrix Code for documentation of filter changes

    This information will be available soon.

    front-i3one
    side-i3one
    explosion-i3one
    water-tap-i3one-outline

    Your request, our service!

    Whether you need personal advice or an individual offer – we are here for you. Call us via +49 40 2576748-0 or send us your request for information!

    Send a non-binding inquiry now

    i3 Medical Series of Films

    In these animated films, we present the features and benefits of our medical products.

    Find out what features our compact Point-of-Use water filters have to interrupt potential pathways of contamination right at the point of use. Learn about the benefits of this effective and easy-to-use solution that can directly contain waterborne nosocomial infections directly.

    Also discover the benefits of the i3 trackApp for simple digital filter changes.

    Safe water hygiene in healthcare: How i3 ONE Point-of-Use water filters help prevent infections
    Use of i3 Point-of-Use water filters in the daily routine of healthcare facilities
    Installation of the i3 water filters i3 ONE, i3 TWO connect & i3 TWO direct
    Filter change – digital, efficient & safe – with the i3 trackApp