Disposable tap water filter

Safe water hygiene with the i3 ONE

The i3 ONE disposable water filter is used in medical settings to prevent infections caused by bacteria such as Legionella pneumophila, Pseudomonas aeruginosa and non-tuberculous mycobacteria (NTM). It is used on the water tap for the microfiltration of piped water.

Assists prevent infections caused by waterborne pathogens from water pipes
Effective protection in areas where aerosols are generated
Specifically developed to protect immunocompromised and immunosuppressed patients
Especially relevant in oncology, neonatology, transplant and intensive care units

i3 ONE | CE i3 ONE | FDA

i3 ONE | CE

Art. No. 203100

Request Information

This disposable water filter is a CE-marked Class I medical device and fulfils all the requirements of the EU Medical Device Regulation (MDR).

The quick-release coupling allows the filter to be changed quickly and safely at the tap.

Information on the corresponding quick-release couplings and adapters can be found in the Accessories Catalogue under the Accessories tab.

Bacterial retention as per ASTM F838
Effective protection from retrograde contamination
Compact design with a surface that can be disinfected by wiping for unlimited safe use
Reliable water filtration with a nominal pore size of 0.2 µm (microfiltration)
Proven biocompatibility for user protection and patient safety
Angled laminar water jet to protect against contamination from the siphon
High, stable flow rate throughout the duration of use

Flow rate	12 L/min at 5 bar (initial)*
Bacterial retention	> 7 log per cm² (Brev. Dim.) per cm² filter area
Authorized for use with drinking water	Plastics suitable for use with drinking water as per BS 6920
Protection from retrograde contamination	> 4 log Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus within 24 hours
Disinfection	Can be disinfected by wiping with normal surface disinfectant*
Operating pressure	max 5 bar
Operating temperature	60 °C (max 70 °C for 30 mins)
Duration of use	50 days (7 weeks)
Membrane	i3 high performance flat membrane
Pore size of membrane	0.2 µm
Material authorization	Product is biocompatible as per ISO 10993-1
Shelf life	5 years
Chlorine resistance	≤ 200 ppm active chlorine for 1 hour; ≤ 10 ppm active chlorine for 50 days
Attachment	Quick-release coupling is required for installation
Accessories	Quick-release coupling is required for installation.*
Labelling	Serial number / DataMatrix Code for documentation of filter changes

Accessories Catalog | CE

i3 ONE | FDA – U.S. only

Art. No. 203100-S

Request Information

This i3 ONE disposable water filter is a FDA approved medical device class II.

With its dual membrane layers, the i3 ONE is validated for the retention of bacteria in accordance with ASTM F838 standard for sterilizing grade membrane filters. The membrane retains bacteria, protozoa, fungi and particles larger than 0.2 µm.

The intended use of the water filter i3 ONE is to filter EPA quality drinking water. It retains bacteria, which may aid in infection control. The filters produce water that is appropriate for washing and drinking, superficial wound cleansing (minor cuts, scrapes and abrasions), cleaning of equipment used in medical procedures and washing of surgeon’s hands. The water filters are not intended to provide water that can be used as a substitute for USP grade sterile water.

A quick-release coupling allows the filter to be changed quickly and safely at the tap.

Information on the corresponding quick-release couplings can be found soon in the Couplings Catalog under the Couplings tab.

Sterilizing grade membrane with a double layer pore size of 0.6 µm and 0.2 µm (microfiltration)
Protection due to the bacteriostatic properties of the filter housing in accordance with ISO 22196
Patented design provides a laminar flow directed away from the sinks drain hole
High, stable flow rate throughout the duration of use
Quick connection for quick interchanging of the filter
Compact design for more hand washing space

Data Sheet i3 ONE disposable water filter | FDA – U.S. only

Flow rate	3.2 gal/min (12 L/min) at 75 psi (5 bar) initial*
Bacterial retention	> 7 log per cm² (Brev. Dim.) per cm² filter area
Authorized for use with drinking water	Plastics suitable for use with drinking water as per BS 6920
Extraneous contamination	> 4 log Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus within 24 hours
Disinfection	Can be disinfected by wiping with normal surface disinfectant
Operating pressure	max 75 psi (5 bar)
Operating temperature	max 140 °F (60 °C) during normal use max 158 °F (70 °C) for 30 mins
Duration of use	50 days
Membrane	i3 High performance pleated membrane
Pore size of membrane	0.2 µm
Shelf life	5 years
Chlorine resistance	≤ 200 ppm active chlorine for 1 hour; ≤ 10 ppm active chlorine for 50 days
Attachment	Quick-release coupling is required for installation*
Labelling	Serial number / DataMatrix Code for documentation of filter changes

This information will be available soon.

Your request, our service!

Whether you need personal advice or an individual offer – we are here for you. Call us via +49 40 2576748-0 or send us your request for information!

Send a non-binding inquiry now

i3 Medical Series of Films

In these animated films, we present the features and benefits of our medical products.

Find out what features our compact disposable water filters have to interrupt potential pathways of contamination right at the point of use. Learn about the benefits of this effective and easy-to-use solution that can directly contain waterborne nosocomial infections directly.

Also discover the benefits of the i3 trackApp for simple digital filter changes.